跳到主要內容區
  1. 首頁
  2. 校長室
  3. 校長
  4. 著作

著作

Refereed Publications in Open Literature

  1. Yang, C.M., Kao, C.H., and Liu, T.H. (2012) “An Innovative Product Design Approach Based on TRIZ’s Inventive Principles,” International Journal of Systematic Innovation, 2(2), pp. 1-8, 2012.
  2. Chun-Ming Yang, Thu-Hua Liu, Ching-Han Kao, and Hsing-Tzu Wang (2010), “Integrating AHP and DELPHI Methods to Construct A Green Product Assessment Hierarchy for Early Stages of Product Design and Development,”International Journal of Operations Research, Vol. 7, No. 3, December, 2010, pp.35-pp.43.
  3. Yang, C.M., Kao, C.H., Liu, T.H. and Yang, F.H. (2010) “Applying TRIZ Principles to Construct Creative Universal Design,” International Journal of Systematic Innovation, Vol. 1, 2010, pp.47-58.
  4. Jang-Shyoun You and Thu-Hua Liu (2010), “Optimal Design in Gear Ratio of a City Bike,” Journal of the Chinese Institute of Industrial Engineers, Vol. 27, No. 6, 2010, pp.449-455.
  5. 劉祖華、游章雄、蔡子彥 (2009)，”舒適度於自行車變速操控介面之設計研究,” 工業設計121, 第三十七卷, 第二期,  pp.161-174, 2009.
  6. Hunszu Liu, Sheue-Ling Hwang, and Thu-Hua Liu, “Economic Assessment of Human Error in Manufacturing Environment,” Safety Science, 47, 2009,  pp.170-182.
  7. 楊俊明、劉祖華、高清漢、王杏慈,  ” A Preliminary Study on DFX Based Green Product Assessment”, 工業設計119, 第三十六卷, 第二期, 2008, pp.201-205.
  8. Chaochang Chiu, Kuang-Hung Hsu, Pei-Lun Hsu, Chi-I Hsu, Po-Chi Lee, Wen-Ko Chiou, Thu-Hua Liu, Yi-Chou Chuang, and Chorng-Jer Hwang, “Mining Three-Dimensional Anthropometric Body Surface Scanning Data for Hypertension Detection,” IEEE Transactions on Information Technology in Biomedicine, Vol. 11, No. 3, 2007, pp.264-273.
  9. Jen-Der Lin, Wen-Ko Chiou, Hung-Yu Chang, Feng-Hsuan Liu, Hsiao-Fen Weng, and Thu-Hua Liu, “Association of Hematological Factors with Components of the Metabolic Syndrome in Older and Younger Adults,” Aging Clinical and Experimental Research, Vol. 18, No.6, 2006, pp.477-484.
  10. Wen-Ko Chiou, Jen-Der Lin, Hsiao-Fen Weng, Yung-Chun Ou, Thu-Hua Liu, and Ji-Tseng Fang, “Correlation of the Dysmetabolic Risk Factors with Different Anthropometric Measurements,” The Endocrine Journal, 52(1), 2005, pp.139-148.
  11. Liu H., Hwang S.L., Liu T.H., and Chen G.H., “Implementation of Human Error Diagnosis (HED) System,” Journal of Chinese Institute of Industrial Engineers. Vol. 21, No.1 , 2004, pp.82-91.
  12. 劉祖華，游章雄，江志良，城市自行車齒比設計研究，工業設計，第32卷第2期, Nov. 2004，頁100-108.
  13. Lin J.D., Chiou W.K., Weng H.F., Fang J.T., and Liu T.H., “Application of three-dimensional body scanner: observation of prevalence of metabolic syndrome,” Clinical Nutrition (2004) 23, 1313-1323.
  14. Lin J.D., Chiou W.K., Weng H.F., Tsai Y.H., and Liu T.H., “Comparison of three-dimensional anthropometric body surface scanning with waist hip ratio and body mas index in correlation of metabolic risk factors,” J. Clinical Epidemiology 55 (2002) 757-766.
  15. Chiou W.K., Lin J.D., and Liu T.H., “Anthropometric health index and matabolism-related characteristics of Taiwanese,” Ergonomics (submitted) (IF0.749)
  16. Liu T.H., Chiou W.K., and Lin J. D., (2002), “Identification of anthropometric factor as health index,” J. Chinese Ind. Eng., 19(1): 83-93.
  17. 劉祖華，游章雄，溫紹彥，自行車變速操控介面之設計，(收錄於中共)中國科技發展經典文庫，第三輯，2003年，頁17-20.
  18. 劉祖華，游章雄，溫紹彥，自行車變速操控介面之設計，工業設計，第30卷第2期 (Nov. 2002)，頁119-124.
  19. Liu T.H., Chiou W.K., Lin J.D., and Yu C.Y., “Implementation of whole body scanner for somatype index at Chang Gung Memorial Hospital,” Chang Gung Medical J., Vol.24 No.11, pp.697-707, Nov. 2001.
  20. Kou-Wei Su, Thu-Hua Liu, and Sheue-Ling Hwang, “A developed model of expert system interface (DMESI),” Expert Systems with Applications, 2001/06, Vol. 20, pp.337-346.
  21. Thu-Hua Liu, A.J.C. Trappey, and Chii-Shi Lin, “Development of a SDAI-Based Common Access Interface for Object-Oriented DBMS,” Concurrent Engineering: Research and Applications (CERA), 2000/11, Vol.8, No.3, pp.230-241.
  22. Kou-Wei Su, Sheue-Ling Hwang, and Thu-Hua Liu “Knowledge Architecture and Framework Design for Preventing Human Error in Maintenance Tasks,” Expert Systems with Applications, 2000/08, Vol.19, pp.219-228.
  23. 劉祖華，蕭坤安 “腦性麻痹兒復健助行器在設計需求上的探討”，國科會工程科技通訊，第49期，2000/09，pp. 5-10.
  24. Kou-Wei Su, Sheue-Ling Hwang, and Thu-Hua Liu “Reliability-Centered Maintenance Management: A Case Study on a Public Bus System,” International Journal of Industrial Engineering – Theory, Application, and Practice, volume 7, issue 3 (September 2000), pp.232-241.
  25. 陳一郎、劉祖華、林榮泰（2000），“校園公共空間之安全性評估”， Mingchi Institute of Technology Journal (明志學報), Volume 32, June 2000, pp.145-152
  26. Thu-Hua Liu, Amy J.C Trappey, and J.B. Shyu “ ISO10303 Based PCB Assembly Data Model for Assembly Analysis,” International Journal of Concurrent Engineering: Research and Applications (CERA), Vol. 7, No. 2, 1999/06, pp.159-176. (SCI)
  27. Thu-Hua Liu, Sheue-Ling Hwang, and Jai-Ching Wang (1999) “A Computerized Calibration Service Supporting System (II): A WWW Interface Design,” International Journal of Computer Applications in Technology (IJCAT), A Special Issue on the Advanced Product Data Management Supporting Product Life-Cycle Activities, Vol. 12, NO. 1, pp.60-71. (SCI)
  28. Thu-Hua Liu, Amy J.C Trappey, and Ze-Jun King (1999) “EXPRESS Modeling and Development of a Computerized Calibration Service Supporting System (I),” International Journal of Computer Applications in Technology (IJCAT), A Special Issue on the Advanced Product Data Management Supporting Product Life-Cycle Activities, Vol. 12, NO. 1, pp.46-59. (SCI)
  29. Amy J.C. Trappey, Thu-Hua Liu, and Chii-Tong Hwang (1997) “Using STEP-Compatible Data Modeling Technique for PCB Assembly Analysis,” Computers in Industry, Vol. 34, pp.111-123. (SCI)
  30. Thu-Hua Liu (1998), “The Standards: PDES/STEP ISO-10303,” Concurrent Design of Products, Manufacturing, Process, and Systems (Ben Wang ed.), Gordon and Breach Science Publishers, Amsterdam, Chapter 2, pp.19-50.
  31. Thu-Hua Liu, Amy J.C. Trappey, and Fu-Wei Chan (1997)“A STEP-Based Scheduling System for IC Packaging Industry,” IEEE Transactions on Components, Packaging, and Manufacturing Technology (CPMT)/Part: C, A Special Issue on the Latest Advances in IC Manufacturing in Asia, Vol. 20, No. 4, October, pp.1-12. (代表著作)
  32. Thu-Hua Liu, Chun Zhang, Gary W. Fischer and Hsu-Pin (Ben) Wang (1997) “Assemblability Evaluation Using Fuzzy Inference,” Integrated Product, Process, and Enterprise Design (Ben Wang ed.), Chapman & Hall, New York, 1997, Chapter 9, pp.243-265.
  33. Thu-Hua Liu and Gary W. Fischer (1995) “An Assembly Code Classification and Coding Scheme for A STEP- Based Mechanical Product Model,’ ASME Journal of Manufacturing Review, Vol. 8, No. 1, March 1995, pp.33-46.
  34. J.-K. Wu, J.-H. Wang, C.-X. Fung, and T.-H. L iu (1995),“A Logic Based Mechanical System Design Constraint Model,” International Journal of Engineering with Computers, Vol. 11, 1995, pp.157-166. (SCI)
  35. Thu-Hua Liu (1994) “An Approach for Standard Manufacturing Form Feature Applications,” Mingchi Institute of Technology Journal (明志學報), Volume 26, May 1994, pp.1-24.
  36. Thu-Hua Liu and Gary W. Fischer (1994) “Assembly Evaluation Method for PDES/STEP Based Mechanical Systems,” Journal of Design and Manufacturing, Volume 4, No. 1, March 1994, pp.1-19.
  37. Thu-Hua Liu (1993) “An Object-Oriented Methodology Applied in Group Technology Using Matrix Formulation and Production Rules,” Mingchi Institute of Technology Journal (明志學報), Volume 25, 1993, pp.55-82.
  38. Li-Hong Qiao, Chun Zhang, Thu-Hua Liu, Hus-Pin (Ben) Wang, and Gary W. Fischer (1993) “ A PDES/STEP Based Product Data Preparation Procedure for Computer-Aided Process Planning,” International Journal of Computers in Industry. Vol.21, No.1,1993, pp.11-22. (SCI)
  39. Thu-Hua Liu and Gary W. Fischer (1993) “An Approach for PDES/STEP Compatible Concurrent Engineering Applications,” North Atlantic Treaty Organization, Advanced Study Institute (NATO/ASI) Series F, Concurrent Engineering Tools and Technologies for Mechanical System Design, (Edward J. Haug ed.), Springer-Verlag, New York, 1993, Vol. 108, part 3, pp.433-464.
  40. Thu-Hua Liu and Gary W. Fischer (1993) “Developing Feature-Based Manufacturing Applications Using PDES/STEP,” International Journal of Concurrent Engineering: Research and Applications (CERA), Volume 1, Number 1, 1993, pp.34-45. (SCI)
  41. Jing-Kae (Kirk) Wu, Thu-Hua Liu, and Gary W. Fischer (1992) “PDES/STEP Based Information Model for CAE and CAM Integration,” International Journal of Systems Automation: Research and Applications (SARA), Volume 2, Number 4, 1992, pp.375-394.
  42. Thu-Hua Liu (1988) “Micro-Computer Applied in Truss Analysis Using Finite Element Method,” Mingchi Institute of Technology Journal,(明志學報) Vol. 20, May 1988, pp.53-80.

 

Papers in Conference Proceedings

  1. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Lee, Yan-Lin, and Zheng, Ya-Yi (2016) “A User-Centered, Innovative NPD with Integration of Scenario-based Design and TRIZ,” Proceedings of the 17th Asia Pacific Industrial Engineering and Management Systems Conference (APIEMS 2016), Paper No. 478, 7-10 December, 2016, Howard Hotel, Taipei, Taiwan. (Paper Accepted; Nominated for Best Paper) http://apiems2016.conf.tw/site/page.aspx?pid=901&sid=1087&lang=en
  2. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, and Pei, Hsin-Chun (2016) “Constructing A Structured Innovative Product Design Process By The Integration of Category Classification and Knowledge Effects,” Proceedings of the 7th International Conference on Systematic Innovation (ICSI), Paper No. 35, 19-22 July, 2016, Lisbon, Portugal. (Best Paper Award) http://icsi2016.myfreesites.net/
  3. 楊俊明、高清漢、劉祖華、陳奕文 (2016)，” 以KJ法與修正式德菲法探討蒙特梭利教具啟發多元智能之教玩具設計研究初探”，第五屆工程與科技教育學術研討會，台北，台灣師範大學，2016/5/13，Paper No. A1-01。(MOST104-2221-E-131-009-) 
  4. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, and Chen, Yi-Wun (2016) “Using the Theory of Multiple Intelligences and KJ Technique to Explore the Design of Toys for English Language Learning,” Proceedings of the International Conference on Innovation and Management (IAM2016W), Paper No. P0146, 27-30 January, 2016, Palau. (MOST104-2221-E-131-009-) http://iam2016w.conf-online.org/
  5. 李彥霖、陳奕文、謝承豪、紀冠宇、楊俊明、高清漢、劉祖華 (2014)，”整合DfE與TRIZ建構綠色創新設計流程-以釘書機為例”，中國工業工程學會103年度年會暨學術研討會，新北市，明志科技大學，2014/12/6，Paper No. B167。
  6. 陳奕文、楊俊明、高清漢、劉祖華 (2014)，” 以多元智能理論探討市售玩具類型與幼兒智能發展之關係”，第三屆工程與科技教育學術研討會，台中，修平科技大學，2014/5/16，Paper No. A3-02。
  7. 李彥霖、王元立、楊俊明、高清漢、劉祖華 (2014)，”整合情境故事法與TRIZ建構新產品創新設計流程”，第21屆中華民國人因工程學會年會暨學術研討會(EST2014)，台中，國立勤益科技大學，2014/3/28~2014/3/29，Paper No. PSD004。
  8. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Chen, Ying-Miao, and Chen, Yi-Wun (2014) “The Design Elements of Commercially Available Toys Associated with Bodily-Kinesthetic Intelligence Using Theory of Multiple Intelligences,” Proceedings of the International Conference on Innovation and Management (IAM2014W), Paper No. P0159, 20-23 January, 2014, Bangkok, Thailand.
  9. 國外研討會資料:國外研討會資料有2筆Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Chang, Ching-Hsiang, and Lee, Yan-Lin (2014) “An Integrated Method Incorporating TRIZ and Morphological Approach to Promote Conceptual Design,” Proceedings of the International Conference on Innovation and Management (IAM2014W), Paper No. P0158, 20-23 January, 2014, Bangkok, Thailand. (NSC-101-2221-E-131-002-MY2)
  10. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Lin, Ting, and Pei, Hsin-Chun (2013) “Combining TRIZ Theories and Universal Design Initiatives within an Innovative Process for Product Design – A Preliminary Study,” Proceedings of the Fifth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB V), Paper No. MME08, 4-6 September, 2013, Luang Prabang, Lao PDR. (NSC-101-2221-E-131-002-MY2)
  11. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Lin, Ting, and Chen, Yi-Wun (2013) “Synergizing both Universal Design Principles and Su-Field Analysis to an Innovative Product Design Process,” Proceedings of the Institute of Industrial Engineers Asian Conference 2013, Paper No. 206, pp. 1183-1190, 18-20 July, 2013, Taipei, TAIWAN. (NSC-99-2221-E-131-031-MY2)
  12. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Pei, Hsin-Chun, and Lee, Yan-Lin (2013) “A Systematic and Innovative Approach to Universal Design Based on TRIZ Theories,” Proceedings of the Institute of Industrial Engineers Asian Conference 2013, Paper No. 161, pp. 899-906, 18-20 July, 2013, Taipei, TAIWAN. (NSC-99-2221-E-131-031-MY2)
  13. 李彥霖、楊俊明、高清漢、劉祖華 (2013)，” 以物質-場分析建構系統化的創新設計流程之初探”，第11屆台塑關係企業應用研討會，林口，長庚大學，2013/6/28，Paper No. E-13。
  14. 陳盈妙、陳奕文、楊俊明、高清漢、劉祖華 (2013)，” 運用KJ法探討市售玩具類型與幼兒肢體動覺智能之關係”，第11屆台塑關係企業應用研討會，林口，長庚大學，2013/6/28，Paper No. E-09。
  15. 李彥霖、陳奕文、楊俊明、高清漢、劉祖華 (2013)，” 以TRIZ工具建構系統化的創新設計流程”，第二屆工程與科技教育學術研討會，台北，師範大學，2013/5/17，Paper No. A3-05，pp. 126-136。
  16. 陳盈妙、陳奕文、楊俊明、高清漢、劉祖華 (2013)，” 以多元智能理論探討市售玩具類型與幼兒智能發展之關係”，第二屆工程與科技教育學術研討會，台北，師範大學，2013/5/17，Paper No. B2-03，pp. 265-274。
  17. 陳盈妙、陳奕文、楊俊明、高清漢、劉祖華 (2013)，” 以多元智能理論探討市售玩具類型與幼兒智能發展之關係”，第二屆工程與科技教育學術研討會，台北，師範大學，2013/5/17，Paper No. B2-03，pp. 265-274。
  18. 斐心淳、林廷、楊俊明、高清漢、劉祖華  (2013)，” 建構以TRIZ方法為基礎的系統性通用設計流程”，2013大中華系統性創新研討會，中壢，中原大學，2013/1/5，Paper No. C03。(NSC-99-2221-E-131-031-MY2)
  19. 王元立、楊俊明、高清漢、劉祖華 (2012) ”整合QFD,KE與創新問題解決知識庫建構以使用者為導向之創新產品設計流程-初探”，2012參與中國工業工程學會地17屆年會暨工業工程學術研討會，彰化，大葉大學，2012/12/15，論文編號：L-09。
  20. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Lin, Ting, and Pei, Hsin-Chun (2012) “An Experimental Study to Assess Computer Keyboard Design,” 4th International Conference on Applied Human Factors and Ergonomics (AHFE 2012), Paper No. 586, 21-25 July, 2012, San Francisco, CA, USA. (NSC-99-2221-E-131-031-MY2)
  21. Yang, Chun-Ming, Kao, Ching-Han, Liu, Thu-Hua, Pei, Hsin-Chun, and Lin, Ting (2012) “Integrating UD Principles and TRIZ to Re-design Computer Keyboard,” 4th International Conference on Applied Human Factors and Ergonomics (AHFE 2012), Paper No. 384, 21-25 July, 2012, San Francisco, CA, USA. (NSC-99-2221-E-131-031-MY2)
  22. 范致豪、張翼書、陳勁弘、劉祖華(2012) ，”溫室氣體碳排放盤查-以台灣地區新北市明志科技大學為例。The 15th Mainland-Taiwan Environmental Protection conference And 1st Resource, Environment and Sustainable Devolopment by Postgraduate’s Academic Forum,NOV.2-6,2012
  23. 王杏慈、楊俊明、劉祖華、高清漢 (2011)，” 建構產品綠色評估架構”，2011年產業資訊應用研討會，台北，明志科技大學，2011/10/28，Paper No. 49。
  24. 張景翔、楊俊明、高清漢、劉祖華 (2011)，” 運用系統性創新設計方法提昇產品概念設計”，2011年產業資訊應用研討會，台北，明志科技大學，2011/10/28，Paper No. 26。
  25. 王元立、楊俊明、高清漢、劉祖華 (2011)，”整合感性、萃智與品質機能展開法之初探：以電腦滑鼠為例”，2011大中華系統性創新研討會，彰化，大葉大學，2011/1/15，Paper No. 16。
  26.  Yang, Chun-Ming, Kao, Ching-Han, and Liu, Thu-Hua (2010) “A TRIZ-based Systematic Innovation Product Design Process – A Preliminary Study,” The 16th ISSAT International Conference on Reliability and Quality in Design (RQD ‘10), Paper No. RQD10-410, 5-7 August, 2010, Washington D.C., USA.
  27. Liu, Thu-Hua, Yang, Chun-Ming, Kao, Ching-Han, and Wang, Hsing-Tzu (2010) “An Application of AHP and Delphi Methods on Constructing Green Product Assessment – A Preliminary Study,” The 2010 International Conference on Innovation and Management (IAM 2010), Paper No. P0287, 7-10 July, 2010, Penang, Malaysia.
  28.  王杏慈、楊俊明、劉祖華、高清漢 (2010)，”運用德菲法與AHP層級分析法建構產品綠色評估因子架構”，第八屆台塑關係企業應用研討會，台北，明志科技大學，2010/6/18，B1-16。
  29. 王元立、楊俊明、高清漢、劉祖華 (2010)，”整合仿生資料庫與品質機能展開法的系統性仿生概念設計”，第八屆台塑關係企業應用研討會，台北，明志科技大學，2010/6/18，B1-10。
  30. 楊俊明、高清漢、劉祖華、楊富先,”運用TRIZ原則建構具創造性的通用設計”,2009中華系統創新研討會論文集,新竹清華大學,1/17, SI09_005, 2009.
  31. 王杏慈、楊俊明、劉祖華、高清漢 (2008)，” 以設計角度建構綠色產品開發流程之初探”, 2008明志科技大學技術與教學研討會論文集,台北明志科技大學, 12/5, pp.E-026-541~544, 2008.
  32. Liu, T.H., and Yang, C.M. (2007) “DFX Based Green Product Assessment,” The Sixth International Conference on Information and Management Sciences (IMS 2007), 1-6 July, 2007, Lhasa, Tibet, China.
  33. 顏谷峰、劉祖華、邱文科、梁又照，”站立式電動輪椅使用性實務改良設計”，2005世界華人工業設計研討會，台灣桃園，長庚大學，2005/11/5-6, pp.235-240.
  34. Hunszu Liu., Sheue-Ling Hwang., and Thu-Hua Liu, “Economic Assessment of Human Error in Semiconductor Manufacturing Environment,” HCI International 2005, 22-27 July, 2005, Las Vegas, Nevada USA.
  35. 江志良、游章雄、劉祖華，城市自行車速比設計研究，台北科技大學2005國際研討會論文集，2004年4月16日，台灣台北。
  36. 劉祖華、游章雄、江志良，多變數城市自行車最適變化速比之設計研究，銘傳大學2004國際學術研討會設計組論文集，2004年3月12日，台灣桃園。
  37. Yi-Chou Chuang, Yu-Cheng Lin, Chien-Hsin Yang, Thu-Hua Liu, and Wen-ko Chiou, “Data mining for three-dimensional body surface and Biochemical data using back-propagation neural network,” Health Care and Case Management Conference Proceeding, S.S. Wu ed., 2004.10.02, Taipei, Taiwan, pp.383-393.
  38. Liu H., Hwang S.L., Liu T.H., and Chen K.H., “Assessment of Human Error Based on Evaluation of Plant Operations: Requirements and Implementation of Regression Model,” IEA 2003, August, Seoul, Korea.
  39. Liu H., Hwang S.L., Liu T.H., and Chen K.H., “Reducing Latent Human Error through the Incorporation of Contral Chart Technique in Semiconductor Industry,” HAAMAHA 2003, May 26-30, Rome, Italy.
  40. Thu-Hua .Liu and Wen-Ko Chiou, “3D Scanning And The Mask Industry In Taiwan: A New Business Paradigm” The XII Acme International Conference on Pacific Rim Management” 12th Annual Meeting, August 1-3, 2002, pp.56-61, Los Angeles, U.S.A.
  41. Wen-Ko Chiou,, Tyan-Yu Wu and Thu-Hua Liu, “3D Digital Human Body Modeling For E-Commerce” The XII Acme International Conference on Pacific Rim Management” 12th Annual Meeting, August 1-3, 2002, pp.50-55, Los Angeles, U.S.A.
  42. 劉祖華，游章雄，溫紹彥，自行車變速操控介面之設計，人因工程應用於設計之發展趨勢研討會，2002年11月，台灣台北。
  43. Cherng-Min Ma, Her-Kun Chang, T.H. Liu, and Yu-Chun Hsu, “A Functional Curriculum Internet Mathematics Learning System for Children with Mental Retardation” The XII Acme International Conference on Pacific Rim Management” 12th Annual Meeting, August 1-3, 2002, pp.424-429, Los Angeles, U.S.A.
  44. 張永忠、游志雲、劉祖華,”應用3D人體掃描資料於靜態人體尺寸的擷取方法” ，第二屆3D人體體型銀行之建立與應用論壇論文集。台灣桃園，2002/08/16, pp. 77-84.
  45. 劉祖華, “以宏觀角度談三次元人體體型銀行”，第二屆3D人體體型銀行之建立與應用論壇論文集。2002/08/16, p.76.
  46. 李博智、邱昭彰、邱文科、劉祖華、莊逸洲、黃崇哲、許光宏，“三維人體測值及資料探勘技術在高血脂症預測模型之應用”，第二屆3D人體體型銀行之建立與應用論壇論文集。台灣桃園，2002/08/16, 長庚大學, pp.66-75.
  47. 林仁德、劉祖華、邱文科，“以三度空間掃描來探討新陳代謝症候群” ，第二屆3D人體體型銀行之建立與應用論壇論文集。台灣桃園，2002/08/16, 長庚大學, pp.56-63.
  48. 溫紹彥、劉祖華、顏慶全，“利用設計程序提昇產品的設計研究”，中華民國設計學會2002年設計學術研究成果研討會論文集。pp. 49-52.
  49. T.H. Liu, Y.Y. Yang, Y.Y. Wu, C.c. Chao, C.M. Ma, and H.K. Chang, “Mathematics Learning System forchildren with Disabilities,” An Int. Con. Proceedings of Applications of Human Performance in Health and Disability (July L. Jarrell, ed.), Cairo University, Egypt, March 26-29, 2001, pp. 147-151.
  50. Kuo-Wei Su , Sheue-Ling Hwang , and Thu-Hua Liu "An Knowledge-Based Framework for Preventing Human Error in Maintenance Tasks," The 5th Annual International Conference on Industrial Engineering - Theory, Applications and Practice, December 13-15, 2000, National Tsing Hua University, Taiwan, R.O.C.
  51. 蘇國瑋，黃雪玲，劉祖華 “後勤單位人為維護失誤的降低：復原管理機制之發展與應用”，2000年人因工程學會暨國科會相關計畫研究成果研討會論文集，雲林科技大學，2000/03/04，pp. 254-259.
  52. Thu-Hua Liu, Amy J.C. Trappey, and Chi-Shii Lin, “A Standardized Data Access Interface Based on STEP, ”  中華民國自動化科技學會，第十一屆全國自動化科技研討會，中正大學，88年7月 9 -11 日。
  53. Kou-Wei Su, Sheue-Ling Hwang, and Thu-Hua Liu, “The Application of FMEA on Public Transportation System Maintain ability,” Int. Conf. on TQM and Human Factors, Linkoping, Sweden, 15-17 June, 1999, pp. 421-423.
  54. Thu-Hua Liu, Sheue-Ling Hwang, and Jia-Ching Wang, “WWW Interface Design for Computerized Service Supporting System,” HCI International '99, 8th  Int. Conf. on Human-Computer Interaction, Munich, Germany, Agust 22-29, 1999, Ergonomics and User Interfaces, Volume 1, H.J. Bullinger and J. Ziegler ed., pp. 735-739.
  55. 陳文誌，邱文科，劉祖華，〝公車商業路線成本效益自動化評估程序研究〞明志技術學院87年度技術與教學研討會論文集，pp.4.1 – 4.10, 87年11月 21 日。
  56. Thu-Hua Liu and Wen-Ko Chiou, “Identification of Anthropometric Factors as Health Indices,” The Fourth Franco-Chinois Symposium on Ergonomic Design and Research, Paris, June29-July 1st, 1998.
  57. A.J.C. Trappey, Z.-J. King, and T.-H. Liu (1997), “EXPRESS Data Modeling for the Development of a Computerized Calibration Service Supporting System,”  The 22nd International Conference for Computers and Industrial Engineering, Cairo, Egypt, December 20-22, 1997, pp. 1-4.
  58. 蕭坤安，劉祖華 (1997), “腦性麻痺兒復健助行器在設計需求上的探討”,86年技術與教學研討會論文集，pp.5.55 – 5.60, 86年11月 15 日。
  59. 蕭坤安，劉祖華 (1997), “A Study on the Assistive Walker Design for Cerebral Palsy Children”, ’97 Cross-Strait & International Industrial Design Symposium, Taipei, Taiwan, October 14-16, 1997, pp. 151-156.
  60. Thu-Hua Liu, Kun-An Shiau and Rung-Tai Lin (1997) “Walker Design for Children with Cerebral Palsy,” Proceedings of the International Ergonomics Association 13th Triennial Congress (IEA’97), Vol. 4, Tampere, Finland, June 29-July 4, 1997, pp.466-469.
  61. Amy J.C. Trappey, Chii-Tong Hwang, and Thu-Hua Liu (1996) “A STEP-Compatible Data Model for PCB Assembly Analysis,” Proceedings of ASME/96 Conference, Manufacturing Science and Engineering, MED-Vol. 4, Atlanta, Georgia, USA, November 1996, pp.687-698.
  62. Thu-Hua Liu, Amy J.C. Trappey, and Fu-Wei Chan, “A STEP-Compatible System for IC Packaging Scheduling,” Proceedings of ASME/96 Conference, Manufacturing Science and Engineering, MED-Vol. 4, Atlanta, Georgia, USA, November 1996, pp. 633-648.
  63. Juifen C. Trappey, Thu-Hua Liu, Chii-Tong Hwang, and Fu-Wei Chan (1995) “A STEP-Based Manufacturing Resource Application Protocol for Concurrent Engineering,” Proceedings of Automation’95 Conference, Chun-Li, Taiwan, R.O.C., July 6-9, 1995, pp.179-186.
  64. Thu-Hua Liu, and Shyanglin Lee (1994) “An Application of Fuzzy Logic for Evaluating the Assemblability of Mechanical Parts,” Proceedings of The Asia/Pacific Industrial Engineering Conference, Tainan, Taiwan, R.O.C., December 17-18, 1994, pp.597-602.
  65. Thu-Hua Liu (1994) “An Object-Oriented Application of STEP Form Feature,” Proceedings of The Third International Conference on Automation Technology, AUTOMATION ’94, Taipei, Taiwan, R.O.C., July 6-9, 1994, Volume 2, pp.137-144.
  66. J.-K. Wu, J.-H. Wang, T.-H. Liu, and C.-X. Feng (1993), “Constraint Management of Multidisciplinary Design and Evaluation Environment for Mechanical Systems,” ASME Engineering Database Program Seventh Annual Engineering Database Symposium on “Engineering Data Management: Key to Success in a Global Market”, San Diego, California, August 9-11, 1993, pp.241-249.
  67. Thu-Hua Liu (1993) “An Assembly Code Classification and Coding Scheme Based on A STEP Mechanical Product Model,” Proceedings of Automation’93 Conference, Taichung, Taiwan, ROC, July 14-16, 1993, Volume 2, pp.553-561.
  68. Thu-Hua Liu (1993) “An Assembly Code Classification and Coding Scheme Based on A STEP Mechanical Product Model,” Proceedings of Automation’93 Conference, Taichung, Taiwan, ROC, July 14-16, 1993, Volume 2, pp.553-561.
  69. Li-Hong Qiao, Chun Zhang, Thu-Hua Liu, Hhu-Pin (Ben) Wang, and Gary W. Fischer (1992) “Integration of CAD and CAPP through PDES/STEP,” Presented in The First industrial Engineering Research Conference, Chicago, IL, May 20-21, 1992.
  70. Gary W. Fischer, Thu-Hua Liu, and Jing-Kae Wu (1991) “Definition of An Object-Oriented Concept for A Mechanical System Data Structure to Support Concurrent Engineering,” Proceedings of CALS & CE’91 Conference, Washington, D.C., June 10-14, 1991, pp.581-608.
  71. Thu-Hua Liu (1986) “Interactive Programming Design and Engineering Applications,” Proceedings of First Technology and Professional Education Conference, National Taiwan Institute of Technology, Taipei, Taiwan, March 1986, pp.801-813
 

Other Publications

  1. 楊俊明(主持人)、劉祖華(共同主持人) (2016)，科計部補助專題研究計畫成果報告書，” 以KJ法與修正式德菲法探討蒙特梭利教具啟發多元智能之教玩具設計研究”，計畫編號：MOST104-2221-E-131-009-。
  2. 劉祖華(主持人)、楊俊明(共同主持人) (2014)，國科會補助專題研究計畫成果報告書，” 整合QFD, TRIZ與階層類目法建構以使用者為導向之創新產品設計流程(II)”，計畫編號：NSC101-2221-E-131-002-MY2。
  3. 劉祖華(主持人)、楊俊明(共同主持人) (2013)，國科會補助專題研究計畫成果報告書，” 整合QFD, TRIZ與階層類目法建構以使用者為導向之創新產品設計流程(I)”，計畫編號：NSC101-2221-E-131-002-MY2。
  4. 劉祖華(主持人)、楊俊明(共同主持人) (2012)，國科會補助專題研究計畫成果報告書，”整合通用設計與TRIZ原則的系統性創新通用產品設計(II)”，計畫編號：NSC99-2221-E-131-031-MY2。
  5. 劉祖華(主持人)、楊俊明(共同主持人) (2011)，國科會補助專題研究計畫成果報告書，”整合通用設計與TRIZ原則的系統性創新通用產品設計(I)”，計畫編號：NSC99-2221-E-131-031-MY2。
  6. 劉祖華(主持人)、楊俊明(共同主持人)、王杏慈 (2010)，國科會補助專題研究計畫成果報告書，”以DFX為基之綠色產品評價(III)”，計畫編號：NSC96-2221-E-131-005-MY3。
  7. 劉祖華(主持人)、楊俊明(共同主持人)、王杏慈,國科會補助專題研究計畫成果報告書,”以DFX為基之綠色產品評價(II)”,計畫編號：NSC 96-2221-E-131-005-MY3, 2009.
  8. 劉祖華(主持人)、楊俊明(共同主持人)、王杏慈,國科會補助專題研究計畫成果報告書,”以DFX為基之綠色產品評價(I)”,計畫編號：NSC 96-2221-E-131-005-MY3, 2009.
  9. Thu-Hua Liu, Chi-Yuan Yu and Wen-Ko Chiou, “Occupaional Ergonomics-The 3D Whole Body Anthropometry Data Bank in Taiwan”， pp.155-158，天津科學技術出版社，2001/08初版。
  10. 劉祖華、張瑞芬、歐陽超等合著 (2001) ，”產品資料管理 PDM Schema” ，台中滄海書局，90年10月初版。
  11. 劉祖華 (2001),”掌控企業契機的全球運籌管理,” Synergy綜效, 155期, pp. 13-17, 90年11月。
  12. 劉祖華 (1998) ，“CALS產品資訊管理的建構(下)”，中衛簡訊雜誌，中衛發展中心，132期，pp.64-66，87年1月。
  13. 劉祖華 (1998) ，“CALS產品資訊管理的建構(下)”，中衛簡訊雜誌，中衛發展中心，132期，pp.64-66，87年1月。
  14. 劉祖華 (1998) ，“CALS產品資訊管理的建構(下)”，中衛簡訊雜誌，中衛發展中心，132期，pp.64-66，87年1月。
  15. Jing-Kae (Kirk) Wu, Thu-Hua Liu, and Gary W. Fischer (1992) “An Integrated PDES/STEP Based Information Model for CAE and CAM Applications,” Center for Simulation and Design Optimization of Mechanical Systems, Technical Report R-129, College of Engineering, The University of Iowa, Iowa city, IA 52242, January 1992.
  16. Thu-Hua Liu, and Gary W. Fischer (1993) “An Object-Oriented Assembly Application Methodology for PDES/STEP Based Mechanical Systems,” Center for Simulation and Design Optimization of Mechanical Systems, Technical Report R-154, College of Engineering, The University of Iowa, Iowa city, IA 52242, January 1993.